承印物】:适用于金属铝板、马口铁、不锈钢材料等

【产品举例】:各类金属制品，铝板天花等。

【产品特性】:单组份自干，耐酒精，耐磨，低温自干效果好。

【配套溶剂  】:s-6, s-9稀释剂 

【干燥条件】:自干24小时

注意事项:

1、金属基材【马口铁，铝片】一般含有防锈油，

会影响附着力，印刷前注意除油。

2、如需增强附着力，可在使用时添加，10％的c2固

化剂  均匀搅拌后使用。

3、油墨加入固化剂  后应在8小时内使用，长时间

放置会影响油墨性能。

it is suitable for metal aluminum, iron, stainless steel, etc.

[product examples]: all kinds of metal products, aluminum sheet, smallpox, etc.

[product] characteristics: one from a dry, alcohol resistant, wear resistant, low temperature self good drying effect.

[supporting solvent]: s-6, s-9 diluent

dry condition: 24 hours from dry

matters needing attention:

1. metal substrate [iron, aluminum] generally contains antirust oil.

it will affect the adhesion【敏感词】pay attention to oil removal before printing.

2. if the adhesion is needed, it can be added at the time of use【敏感词】10％ of c2 solid.

the chemical agent is used evenly after mixing.

3, when the ink is added to the curing agent, it should be used in 8 hours, for a long time

the placement will affect the performance of the ink.